Keywords
Theme:
Cadastral, Lot, Parcel, Ownership, Boundary, Subdivision, Municipal Limits, Township, Dominion Land Survey System, Section, Quarter Section, Parks, Indian Reserves, PARK
Place:
Saskatchewan, Canada, North America
Description
-
Abstract
The ‘Park’ layer, as part of the ‘Saskatchewan Administrative Boundary’ data set, contains the annual copy of the GIS layer taken from Information Services Corporation of Saskatchewan’s live geospatial database at the end of each calendar year. The data is comprised of geospatial locations and attributional information for all provincial, national, historical, wilderness and recreational parks that reside within the province of Saskatchewan. The layer identifies each park by name, location and type. A park is defined as an area of land that has restrictions on its use and ownership. The areas and restrictions are defined in the following Acts and Regulations and amendments to these Acts: The Parks Act, the Regional Parks Act, The Meewasin Valley Authority Act, The Wakamow Valley Authority Act, The Wascana Centre Act. This data is suitable for use in Geographic Information Systems (GIS) and Computer Aided Drawing Systems (CAD).
-
Purpose
The ‘Saskatchewan Administrative Boundary’ data set is distributed as the annual release of the provincial boundary as well as all provincial/national parks, rural municipalities, urban municipalities and Indian reserves that reside within the province of Saskatchewan. The data set is produced from Information Services Corporation’s live integrated geospatial database at of the end of each calendar year and is produced in conjunction with the ‘SaskGIS Cadastral’ and ‘SaskGrid TFM’ data sets.
-
Supplementary Information
Questions on product may be directed to Pat Pierce ( (306) 787-0256 or Pat.Pierce@isc.ca) or Perry Frischholz ( (306) 787-0665 or Perry.Frischholz@isc.ca).
»
Status of the data
Complete
Data update frequency:
Annually
»
Time period for which the data is relevant
Beginning date and time:
January 11th, 2008
Ending date and time:
January 10th, 2009
Description:
The data is produced yearly from Information Services Corporation of Saskatchewan's live integrated geospatial database on January 10th of each calendar year.
»
Publication Information
Who created the data: Information Services Corporation of Saskatchewan
Date and time:
2005-02-11
Publisher and place:
Information Services Corporation of Saskatchewan, Regina, Saskatchewan, Canada
»
Data storage and access information
File name: SG_PARK
Type of data: vector digital data
Location of the data:
ftp://portaldata:freedata@ftp.isc.ca/PackagedData/SaskAdmin2008/SaskAdmin2008.zip
Data processing environment: Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.2.4.1420
»
Accessing the data
Data format: SHP
Size of the data: 2.128 MB
Data transfer size: 2.128 MB
Access instructions: See the pre-packaged gallery at www.geosask.ca or contact the ISC Geomatics Distribution Centre for further assistance Toll Free at 1-866-420-6577 or (306) 787-6577 (Regina) or by email at saskmaps@isc.ca
Available media: DVD-ROM/CD-ROM
Available media: Digital Download
»
Accessing the data
Data format: DXF
Size of the data: 2.128 MB
Data transfer size: 2.128 MB
Access instructions: See the pre-packaged gallery at www.geosask.ca or contact the ISC Geomatics Distribution Centre for further assistance Toll Free at 1-866-420-6577 or (306) 787-6577 (Regina) or by email at saskmaps@isc.ca
Available media: DVD-ROM/CD-ROM
Available media: Digital Download
»
Constraints on accessing and using the data
Access constraints:
The data set is licensed for use with no restrictions on who may obtain a license.
Use constraints:
The standard license for this data prohibits redistribution of the data in whole or in part. A resale license is available. There are some restrictions (designed to preserve the integrity of the data) on the presentation of the information as maps on a web site and on the distribution of products derived from this data.
»
Details about this document
Contents last updated: 20080521
at time
11025600
Contents last reviewed: 2008-01-10
Contents to be reviewed: Annually or as required
»
Who completed this document
Rick Knorr - Manager of GIS Data
Information Services Corporation of Saskatchewan
mailing and physical address:
1301 1st Avenue
Regina, Saskatchewan S4R 8H2
Canada
1-800-ASK-ISC1 (voice)
(306) 787-3335 (fax)saskmaps@isc.ca
Hours of service:
8:00 A.M. to 5:00 P.M. CST Monday through Friday
Contact Instructions:
Please use the above contact for any question on the MetaData content or product content.
»
Standards used to create this document
Standard name: FGDC Content Standards for Digital Geospatial Metadata
Standard version: FGDC-STD-001-1998
Time convention used in this document: local time
Metadata profiles defining additonal information
ESRI Metadata Profile: http://www.esri.com/metadata/esriprof80.html
»
Data Quality
- Attribute Accuracy:
-
- Attribute Accuracy Report:
- Attributes have been created by two means, depending on the attribute. Some, like the PPID, are generated by the system according to a set of rules. Others, have been manually entered (transcribed) from the source documents.
Transcribed values are checked manually on a sampling basis to identify errors. As well external sources of information have been used to validate the values wherever possible.
There is no independent quantification of the accuracy rate for the attribute values but it is believed to be very good.
- Logical Consistency Report:
- The data is free of duplicates and overlapping features.
- Completeness Report:
- The data is complete as of the production date for the current year (January 10th). Any changes made after the production date will be reflected in the following year's release.
- Positional Accuracy:
-
- Horizontal Positional Accuracy:
-
- Horizontal Positional Accuracy Report:
- The positions in this data set are correct to within 5-10 metres in the rural portions of the province and to within 1-2 metres in the urban portions. The relative accuracies are better than 5 metres in the rural areas and 1 metre in the urban areas for points that are near each other. The relative accuracies decrease as the distance between points increases.
-
- Horizontal Positional Accuracy Value:
varies
- Horizontal Positional Accuracy Explanation:
- The accuracy of the coordinate varies with the age of the survey, the quality of the survey and the quality of the control in the area of the survey. There has been no attempt to quantify these contributing factors. The coordinates were calculated using information shown on plans of survey and then fit together and, where the fit between the various plans was within acceptable limits rubber sheeted (adjusted) to fit exactly. Where plans did not fit together properly other sources of information were used including, but not only, historical survey plans, field measurements, and aerial photographs.
-
- Vertical Positional Accuracy:
-
- Vertical Positional Accuracy Report:
- N/A
- Lineage:
-
-
- Source Information:
-
- Source Citation:
-
- Citation Information:
-
- Originator:
N/A
- Publication Date:
N/A
- Title:
- Registered Plans of Survey
- Source Scale Denominator:
Variable
- Type of Source Media:
paper
-
- Process Step:
-
- Process Description:
- N/A
- Process Date:
N/A
- Process Step:
-
- Process Description:
- Metadata imported.
- Source Used Citation Abbreviation:
- Process Step:
-
- Process Description:
- Dataset copied.
- Source Used Citation Abbreviation:
- C:\Documents and Settings\bhornung\Desktop\2008 Metadata Update\PARK.shp
- Process Step:
-
- Process Description:
- Metadata imported.
- Source Used Citation Abbreviation:
- \\ltfsprd02\BHornung$\MetaData Enhancement Project\2008 Metadata Update\almost Final_SaskAdmin2008\SaskAdmin_PARK.shp.xml
- Process Step:
-
- Process Description:
- Metadata imported.
- Source Used Citation Abbreviation:
- \\ltfsprd02\BHornung$\MetaData Enhancement Project\2008 Metadata Update\almost Final_SaskAdmin2008\SaskAdmin_PARK.shp.xml
Horizontal coordinate system
Projected coordinate system name: NAD_1983_CSRS98_UTM_Zone_13N
Geographic coordinate system name: GCS_North_American_1983_CSRS98
»
Details
Map Projection Name: Transverse Mercator
Scale Factor at Central Meridian: 0.999600
Longitude of Central Meridian: -105.000000
Latitude of Projection Origin: 0.000000
False Easting: 500000.000000
False Northing: 0.000000
Planar Coordinate Information
Planar Distance Units: meters
Coordinate Encoding Method: coordinate pair
Coordinate Representation
Abscissa Resolution: 0.000000
Ordinate Resolution: 0.000000
Geodetic Model
Horizontal Datum Name: D_North_American_1983_CSRS98
Ellipsoid Name: Geodetic Reference System 80
Semi-major Axis: 6378137.000000
Denominator of Flattening Ratio: 298.257222
Altitude System Definition
Datum Name: N/A
Resolution: N/A
Distance Units: N/A
Encoding Method: N/A
Depth System Definition
Datum Name: N/A
Resolution: N/A
Distance Units: N/A
Encoding Method: N/A
_________________
Bounding coordinates
Horizontal
In decimal degrees
West:
-111.335225
East:
-100.828022
North:
59.328678
South:
48.904244
In projected or local coordinates
Left: 138217.970000
Right: 737767.200000
Top: 6576651.431000
Bottom: 5428572.720000
_________________
Spatial data quality
»
Horizontal positional accuracy
The positions in this data set are correct to within 5-10 metres in the rural portions of the province and to within 1-2 metres in the urban portions. The relative accuracies are better than 5 metres in the rural areas and 1 metre in the urban areas for points that are near each other. The relative accuracies decrease as the distance between points increases.
Estimated accuracy: varies
How this value was determined:
The accuracy of the coordinate varies with the age of the survey, the quality of the survey and the quality of the control in the area of the survey. There has been no attempt to quantify these contributing factors. The coordinates were calculated using information shown on plans of survey and then fit together and, where the fit between the various plans was within acceptable limits rubber sheeted (adjusted) to fit exactly. Where plans did not fit together properly other sources of information were used including, but not only, historical survey plans, field measurements, and aerial photographs.
»
Vertical positional accuracy
N/A
ESRI description
SG_PARK
ESRI feature type: Simple
Geometry type: Polygon
Topology: FALSE
Feature count: 205
Spatial Index: TRUE
Linear referencing: FALSE
»
SDTS description
Feature class: SDTS feature type, feature count
SG_PARK:
G-polygon, 205
Type of object: Feature Class
Number of records: 205
A park is an area of land that has restrictions on its use and ownership. The areas and restrictions are defined in the following Acts and Regulations and amendments to these Acts: The Parks Act, the Regional Parks Act, The Meewasin Valley Authority Act, The Wakamow Valley Authority Act, The Wascana Centre Act.
»
FID
Internal feature number.
Precision: 0
Scale: 0
| Field Type: |
OID |
| Field Width: |
4 |
| Domain: |
Sequential unique whole numbers that are automatically generated. |
»
Shape
Feature geometry.
Precision: 0
Scale: 0
| Field Type: |
Geometry |
| Field Width: |
0 |
| Domain: |
Coordinates defining the features. |
»
PPID
Permanent Provincial IDentifier. Unique identifier. No other instance of this or any other type of object will have the same ID. Used for change detection and notification and for linking external information to this object.
| Field Type: |
Character |
| Field Width: |
10 |
| Domain: |
From 0124000001 to 0124ZZZZZZ |
»
EFFDT
The date this object was added to or updated in the data base.
| Field Type: |
Date |
| Domain: |
Date coded as a character string in the format "MM/DD/YYY". Leading zeros are included where required. |
»
EXPDT
The date this object was removed from the data base. If the expiry date is null the object is currently active. (Objects are not physically removed but only have their expiry date set.)
| Field Type: |
Date |
| Domain: |
Date coded as a character string in the format "MM/DD/YYYY". Leading zeros are included where required. |
»
FEATURECD
Identifies the type of object.
| Field Type: |
Character |
| Field Width: |
12 |
| Domain: |
Value |
Description |
|
|
PARKPPID |
N/A |
»
PARKNM
The name of the park.
| Field Type: |
Character |
| Field Width: |
60 |
»
PARKTYPE
The type of park.
| Field Type: |
Character |
| Field Width: |
4 |
| Domain: |
Value |
Description |
|
|
AT |
Authority |
|
|
HP |
Historic Park |
|
|
HS |
Historic Site |
|
|
NE |
Natural Environment Park |
|
|
NP |
National Park |
|
|
PR |
Protected Area |
|
|
RP |
Recreation Park |
|
|
RS |
Recreation Site |
|
|
WP |
Wilderness Park |
